Call 08048762315 62% Response Rate

our range

Roof Extractor Fans

Roof Extractor Fans

1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.

2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.

3. These sizes are driven by conventional AC motors manufactured by Tier 1 entities

4. Direct drive sizes 483 mm to 965 mm(19" to 38") dia Capacities from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )

5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with Capacity up to 105000 CMH (62000 CFM)

6. Static pressure offered by these fans max upto 50mm

7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building. A splash guard located over the damper pivot area protects against rain entry

8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.

  • Roof Extractor  Tubular Axial 483-4-0.37
  • Roof Extractor  Tubular Axial 483-4-0.37
  • Roof Extractor  Tubular Axial 483-4-0.37
  • Roof Extractor  Tubular Axial 483-4-0.37
  • Roof Extractor  Tubular Axial 483-4-0.37
Roof Extractor  Tubular Axial 483-4-0.37

Roof Extractor Tubular Axial 483-4-0.37

Rs 29,980  / NumberGet Best Price

Minimum Order Quantity: 1 Number

Product Brochure

Model Name/NumberSM-RE-4DBFC-480-CM-0.37
Blower TypeElectrically driven Axial Roof Extractor
Electric Current TypeAC
Blade MaterialPlastic, Aluminium
MountingRoof Fan, Ceiling Fan
Voltage415 V
Air Volume6750 CMH
Speed1440 RPM

Roof Extractor Fans

1.      Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.

2.      Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.

3.      These sizes are driven by conventional AC motors manufactured by Tier 1 entities

4.      Direct drive sizes 483 mm to 965 mm(19" to 38") dia Capacities from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )

5.      Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with Capacity up to 105000 CMH (62000 CFM)

6.      Static pressure offered by these fans max upto 50mm

7.      All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building. A splash guard located over the damper pivot area protects against rain entry

8.      Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.



Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 483-4-0.75
  • Roof Extractor Tubular Axial 483-4-0.75
  • Roof Extractor Tubular Axial 483-4-0.75
  • Roof Extractor Tubular Axial 483-4-0.75
Roof Extractor Tubular Axial 483-4-0.75

Roof Extractor Tubular Axial 483-4-0.75

Rs 31,170  / NumberGet Best Price

Minimum Order Quantity: 1 Number

Product Brochure

Product TypePowered Roof Ventilator
Place Of OriginPan India
Driven TypeElectric
PowerAC
Blade MaterialAluminium
Usage/ApplicationIndustrial
BrandZyphyr
Electric Current TypeAC

Roof Extractor Fans

  1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.
  2.   Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.
  3.  Our fans are driven by conventional AC motors  of reputed brands.
  4.   Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )
  5.   Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)
  6.   Static pressure offered by these fans max upto 50mm
  7.   All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building
  8.  Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.

 

 

 

 

 

 

 

 

 



Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges Extra Installation Charges Extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 483-2-1.5
  • Roof Extractor Tubular Axial 483-2-1.5
  • Roof Extractor Tubular Axial 483-2-1.5
  • Roof Extractor Tubular Axial 483-2-1.5
Roof Extractor Tubular Axial 483-2-1.5

Roof Extractor Tubular Axial 483-2-1.5

Rs 32,375  / NumberGet Best Price

Minimum Order Quantity: 1 Number

Product Brochure

Model Name/NumberSM-RE-2DBFC-480-CM-0.75
Usage/ApplicationIndustrial
MaterialSteel/Aluminium
Electric Current TypeAC
Blade MaterialAluminium, Plastic
MountingRoof Fan, Ceiling Fan
Voltage415 V
Product TypeRoof Mount

Roof Extractor Fans
 1.      Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.

 

2.      Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.
3.      Our fans are driven by conventional AC motors  of reputed brands.
4.      Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )
5.      Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)
6.      Static pressure offered by these fans max upto 50mm
7.      All these up-blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building
8.      Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.

 

 

 

 

 

 



Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 483-2-2.2
  • Roof Extractor Tubular Axial 483-2-2.2
  • Roof Extractor Tubular Axial 483-2-2.2
  • Roof Extractor Tubular Axial 483-2-2.2
Roof Extractor Tubular Axial 483-2-2.2

Roof Extractor Tubular Axial 483-2-2.2

Rs 33,860  / NumberGet Best Price

Minimum Order Quantity: 1 Number

Product Brochure

Model Name/NumberSM-RE-2DBFC-480-CM-2.2
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialAluminium, Plastic
MountingRoof Fan, Ceiling Fan
Voltage415 V
Product TypeRoof Ventilator, Duct Mounted Fan
Air Volume11500 CMH

Roof Extractor Fans

 

1.      Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.
2.      Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.
3.      Our fans are driven by conventional AC motors  of reputed brands.
4.      Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )
5.      Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)
6.      Static pressure offered by these fans max upto 50mm
7.      All these up-blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building
8.      Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.

 

 

 

 

 

 

 



Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 483-2-3.7
  • Roof Extractor Tubular Axial 483-2-3.7
  • Roof Extractor Tubular Axial 483-2-3.7
  • Roof Extractor Tubular Axial 483-2-3.7
  • Roof Extractor Tubular Axial 483-2-3.7
Roof Extractor Tubular Axial 483-2-3.7

Roof Extractor Tubular Axial 483-2-3.7

Rs 36,070  / NumberGet Best Price

Minimum Order Quantity: 1 Number

Product Brochure

Model Name/NumberSM-RE-2DBFC-480-CM-3.7
Usage/ApplicationIndustrial
Blade MaterialAluminium, Plastic
MountingRoof Fan, Ceiling Fan
Product TypeDuct Mounted Fan, Roof Exhaust, V-Belt Driven Unit
Voltage415 V AC
Electric Current TypeAC
Frequency50 HZ

Roof Extractor Fans

1.Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2.      Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.
3.      Our fans are driven by conventional AC motors  of reputed brands.
4.      Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )
5.      Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)
6.      Static pressure offered by these fans max upto 50mm
7.      All these up-blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building
8.      Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with

Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 610-6-0.55
  • Roof Extractor Tubular Axial 610-6-0.55
  • Roof Extractor Tubular Axial 610-6-0.55
  • Roof Extractor Tubular Axial 610-6-0.55
Roof Extractor Tubular Axial 610-6-0.55

Roof Extractor Tubular Axial 610-6-0.55

Price on Request

Product Brochure

Model Name/NumberSM-RE-6DBFC-610-CM-0.55
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialPlastic, Aluminium
MountingRoof Fan, Ceiling Fan, Duct Fan
Voltage415 V AC
Product TypeDuct Mounted Fan, Roof Mount, Wall Mounted Fan, V-Belt Driven Unit
Speed960 RPM
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.


Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges Extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 610-4-0.75
  • Roof Extractor Tubular Axial 610-4-0.75
  • Roof Extractor Tubular Axial 610-4-0.75
  • Roof Extractor Tubular Axial 610-4-0.75
  • Roof Extractor Tubular Axial 610-4-0.75
Roof Extractor Tubular Axial 610-4-0.75

Roof Extractor Tubular Axial 610-4-0.75

Price on Request

Product Brochure

Model Name/NumberSM-RE-4DBFC-610-CM-0.75
Power0.75 KW
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialAluminium, Plastic
MountingCeiling Fan, Duct Fan, Roof Fan
Voltage415 V
Product TypeRoof Mount, V-Belt Driven Unit, Duct Mounted Fan
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.


Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor tubular Axial 610-4-1.1
  • Roof Extractor tubular Axial 610-4-1.1
  • Roof Extractor tubular Axial 610-4-1.1
  • Roof Extractor tubular Axial 610-4-1.1
  • Roof Extractor tubular Axial 610-4-1.1
Roof Extractor tubular Axial 610-4-1.1

Roof Extractor tubular Axial 610-4-1.1

Price on Request

Product Brochure

Model Name/NumberSM-RE-4DBFC-610-CM-1.1
PowerAC
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialPlastic, Aluminium
MountingDuct Fan, Roof Fan, Ceiling Fan
Voltage415 V
Product TypeDuct Mounted Fan, Wall Mounted Fan, Roof Mount, V-Belt Driven Unit
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.


Additional Information:

  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 610-4-1.5
  • Roof Extractor Tubular Axial 610-4-1.5
  • Roof Extractor Tubular Axial 610-4-1.5
  • Roof Extractor Tubular Axial 610-4-1.5
  • Roof Extractor Tubular Axial 610-4-1.5
Roof Extractor Tubular Axial 610-4-1.5

Roof Extractor Tubular Axial 610-4-1.5

Price on Request

Product Brochure

Model Name/NumberSM-RE-4DBFC-610-CM-1.5
Power1.5 KW
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialPlastic, Aluminium
MountingCeiling Fan, Duct Fan, Roof Fan
Voltage415 V
Product TypeRoof, V-Belt Driven Unit, Wall Mounted Fan, Duct Mounted Fan
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.


Additional Information:

  • Delivery Time: 2 Weekd
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 610-4-2.2
  • Roof Extractor Tubular Axial 610-4-2.2
  • Roof Extractor Tubular Axial 610-4-2.2
  • Roof Extractor Tubular Axial 610-4-2.2
  • Roof Extractor Tubular Axial 610-4-2.2
Roof Extractor Tubular Axial 610-4-2.2

Roof Extractor Tubular Axial 610-4-2.2

Price on Request

Product Brochure

Model Name/NumberSM-RE-4DBFC-610-CM-2.2
Size610 mm
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialPlastic, Aluminium
MountingRoof Fan, Duct Fan, Ceiling Fan
Voltage415 V
Product TypeWall Mounted Fan, Duct Mounted Fan, Roof, V-Belt Driven Unit
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.


Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 610-4-5.5
  • Roof Extractor Tubular Axial 610-4-5.5
  • Roof Extractor Tubular Axial 610-4-5.5
  • Roof Extractor Tubular Axial 610-4-5.5
  • Roof Extractor Tubular Axial 610-4-5.5
  • Roof Extractor Tubular Axial 610-4-5.5
Roof Extractor Tubular Axial 610-4-5.5

Roof Extractor Tubular Axial 610-4-5.5

Price on Request

Product Brochure

Model Name/NumberSM-RE-4DBFC-610-CM-5.5
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialAluminium, Plastic
MountingCeiling Fan, Roof Fan, Duct Fan
Voltage415 V
Product TypeDuct Mounted Fan, V-Belt Driven Unit, Roof, Wall Mounted Fan
Air Volume19500 CMH
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.


Additional Information:

  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 610-2-11
  • Roof Extractor Tubular Axial 610-2-11
  • Roof Extractor Tubular Axial 610-2-11
  • Roof Extractor Tubular Axial 610-2-11
  • Roof Extractor Tubular Axial 610-2-11
  • Roof Extractor Tubular Axial 610-2-11
  • Roof Extractor Tubular Axial 610-2-11
Roof Extractor Tubular Axial 610-2-11

Roof Extractor Tubular Axial 610-2-11

Price on Request

Product Brochure

Model Name/NumberSM-RE-2DBFC-610-CM-11
Power11 KW
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialAluminium, Plastic
MountingRoof Fan, Duct Fan, Ceiling Fan
Voltage415 V
Speed2880 RPM
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.


Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 965-4-11
  • Roof Extractor Tubular Axial 965-4-11
  • Roof Extractor Tubular Axial 965-4-11
  • Roof Extractor Tubular Axial 965-4-11
  • Roof Extractor Tubular Axial 965-4-11
  • Roof Extractor Tubular Axial 965-4-11
Roof Extractor Tubular Axial 965-4-11

Roof Extractor Tubular Axial 965-4-11

Price on Request

Product Brochure

Model Name/NumberSM-RE-4DBFC-965-CM-11
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialAluminium, Plastic
MountingRoof Fan, Duct Fan, Ceiling Fan
Voltage415 V AC
Product TypeDuct Mounted Fan, Roof Mount, V-Belt Driven Unit, Wall Mounted Fan
Speed1440
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.


Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 965-4-15
  • Roof Extractor Tubular Axial 965-4-15
  • Roof Extractor Tubular Axial 965-4-15
  • Roof Extractor Tubular Axial 965-4-15
  • Roof Extractor Tubular Axial 965-4-15
  • Roof Extractor Tubular Axial 965-4-15
Roof Extractor Tubular Axial 965-4-15

Roof Extractor Tubular Axial 965-4-15

Price on Request

Product Brochure

Model Name/NumberSM-RE-4DBFC-965-CM-15
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialAluminium, Plastic
MountingRoof Fan, Duct Fan, Ceiling Fan
Voltage415 V
Product TypeDuct Mounted Fan, Wall Mounted Fan, V-Belt Driven Unit, Roof Mount
Air Volume61000 CMH
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.


Additional Information:

  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Axial Low Profile 550-4D
  • Roof Extractor Axial Low Profile 550-4D
  • Roof Extractor Axial Low Profile 550-4D
  • Roof Extractor Axial Low Profile 550-4D
  • Roof Extractor Axial Low Profile 550-4D
  • Roof Extractor Axial Low Profile 550-4D
  • Roof Extractor Axial Low Profile 550-4D
Roof Extractor Axial Low Profile 550-4D

Roof Extractor Axial Low Profile 550-4D

Price on Request

Product Brochure

Product TypeRoof Extractor Suitable for Flat and Slant Roof
Place Of OriginPan India
Driven TypeElectric
Power650 W
Mounting TypeRoof mounted Suitable for flat and Slant roof
BrandZyphyr
Size550mm dia
CertificationISO 9008-2015
Roof Extractor Axial Flow Fans with External Rotor Motor
1. External Rotor Motor driven Axial fans are speed controlled by either frequency or voltage 2. Impellers are directly mounted on the motor for higher efficiency 3. Slim compact Design Quiet Operation, Low Weight. These external rotor motor fans use minimal space and are hence used in conditions with space restrictions4. Offered with optional accessories like flat guard, square or circular wall plate 5. Insulation class F . IP44 as standard, rated to operate from -400C to 650C 6. Application include, Building ventilation, Smoke Extraction, General ventilation, Hot air and fume removal, to aid forced ventilation or inlet of fresh-air and ensuring enough air changes to ensure healthy work space for your work force. 7. All These fans are available with Circular Casing with single side or Double side flange for Mounting assistance onto equipment/ducts etc. Please inform us during the time of order8. These fans can be also offered with Square type casing to suit equipment mounting as in above case, please inform us during the time of ordering9. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.10. A series of axial extraction turrets with horizontal air flow, particularly suitable to extract stale air from sheds, warehouses, large civil or industrial buildings and any place where large air flows at relatively low pressures are needed. The wide range available, with a capacity up to 34,000 m3/h, offers the possibility to choose the most appropriate model according to the problem. It is available in both single phase and three-phase versions. It can work in continuous service, and transfer fluids having a temperature up to 40°C.11. Upon request it can be supplied with an EEXD motor (explosion proof) provided with necessary certification.12. It must be remembered that with the installation of a gravity shutter, the capacity is reduced by approximately 10% .


Additional Information:

  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Crate Freight Charges Extra

View Complete details

get quoterequest a call back
  • Roof Extractor Axial Low Profile 600 4E
  • Roof Extractor Axial Low Profile 600 4E
  • Roof Extractor Axial Low Profile 600 4E
  • Roof Extractor Axial Low Profile 600 4E
  • Roof Extractor Axial Low Profile 600 4E
  • Roof Extractor Axial Low Profile 600 4E
  • Roof Extractor Axial Low Profile 600 4E
Roof Extractor Axial Low Profile 600 4E

Roof Extractor Axial Low Profile 600 4E

Price on Request

Product Brochure

Product TypeRoof Extractor
Place Of OriginPan India
Driven TypeElectric
Mounting TypeRoof Mount suitable for both Flat and Slant roofs
BrandZyphyr
CertificationISO 9008-2015
Voltage230 V AC
MountingRoof mount suitable for flat as well as slant roof
Roof Extractor Axial Flow Fans with External Rotor Motor
1. External Rotor Motor driven Axial fans are speed controlled by either frequency or voltage 2. Impellers are directly mounted on the motor for higher efficiency 3. Slim compact Design Quiet Operation, Low Weight. These external rotor motor fans use minimal space and are hence used in conditions with space restrictions4. Offered with optional accessories like flat guard, square or circular wall plate 5. Insulation class F . IP44 as standard, rated to operate from -400C to 650C 6. Application include, Building ventilation, Smoke Extraction, General ventilation, Hot air and fume removal, to aid forced ventilation or inlet of fresh-air and ensuring enough air changes to ensure healthy work space for your work force. 7. All These fans are available with Circular Casing with single side or Double side flange for Mounting assistance onto equipment/ducts etc. Please inform us during the time of order8. These fans can be also offered with Square type casing to suit equipment mounting as in above case, please inform us during the time of ordering9. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.10. A series of axial extraction turrets with horizontal air flow, particularly suitable to extract stale air from sheds, warehouses, large civil or industrial buildings and any place where large air flows at relatively low pressures are needed. The wide range available, with a capacity up to 34,000 m3/h, offers the possibility to choose the most appropriate model according to the problem. It is available in both single phase and three-phase versions. It can work in continuous service, and transfer fluids having a temperature up to 40°C.11. Upon request it can be supplied with an EEXD motor (explosion proof) provided with necessary certification.12. It must be remembered that with the installation of a gravity shutter, the capacity is reduced by approximately 10% .

Additional Information:

  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Crate Freight Charges Extra

View Complete details

get quoterequest a call back
  • Roof Extractor Axial Low Profile 600-4D
  • Roof Extractor Axial Low Profile 600-4D
  • Roof Extractor Axial Low Profile 600-4D
  • Roof Extractor Axial Low Profile 600-4D
  • Roof Extractor Axial Low Profile 600-4D
  • Roof Extractor Axial Low Profile 600-4D
Roof Extractor Axial Low Profile 600-4D

Roof Extractor Axial Low Profile 600-4D

Price on Request

Product Brochure

Usage/ApplicationRooftop
Product TypeRoof Ventilator
Place Of OriginPan India
Driven TypeElectric
PowerAC
Mounting TypeRoof Mount Suitable for both Flat and Slant roof
BrandZyphyr
CertificationISO 9008-2015
Roof Extractor Axial Flow Fans with External Rotor Motor
1. External Rotor Motor driven Axial fans are speed controlled by either frequency or voltage 2. Impellers are directly mounted on the motor for higher efficiency 3. Slim compact Design Quiet Operation, Low Weight. These external rotor motor fans use minimal space and are hence used in conditions with space restrictions4. Offered with optional accessories like flat guard, square or circular wall plate 5. Insulation class F . IP44 as standard, rated to operate from -400C to 650C 6. Application include, Building ventilation, Smoke Extraction, General ventilation, Hot air and fume removal, to aid forced ventilation or inlet of fresh-air and ensuring enough air changes to ensure healthy work space for your work force. 7. All These fans are available with Circular Casing with single side or Double side flange for Mounting assistance onto equipment/ducts etc. Please inform us during the time of order8. These fans can be also offered with Square type casing to suit equipment mounting as in above case, please inform us during the time of ordering9. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.10. A series of axial extraction turrets with horizontal air flow, particularly suitable to extract stale air from sheds, warehouses, large civil or industrial buildings and any place where large air flows at relatively low pressures are needed. The wide range available, with a capacity up to 34,000 m3/h, offers the possibility to choose the most appropriate model according to the problem. It is available in both single phase and three-phase versions. It can work in continuous service, and transfer fluids having a temperature up to 40°C.11. Upon request it can be supplied with an EEXD motor (explosion proof) provided with necessary certification.12. It must be remembered that with the installation of a gravity shutter, the capacity is reduced by approximately 10% .

Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges Extra

View Complete details

get quoterequest a call back
  • Roof Extractor Axial Low Profile 630 4D
  • Roof Extractor Axial Low Profile 630 4D
  • Roof Extractor Axial Low Profile 630 4D
  • Roof Extractor Axial Low Profile 630 4D
  • Roof Extractor Axial Low Profile 630 4D
  • Roof Extractor Axial Low Profile 630 4D
  • Roof Extractor Axial Low Profile 630 4D
Roof Extractor Axial Low Profile 630 4D

Roof Extractor Axial Low Profile 630 4D

Price on Request

Product Brochure

Place Of OriginPan India
Driven TypeElectric
Power900 W
Mounting TypeRoof Extractor suitable for Flat and Slant roof
BrandZyphyr
CertificationISO 9008-2015
Voltage415 V AC
MountingRoof Mount suitable for flat and slant roof
Roof Extractor Axial Flow Fans with External Rotor Motor
1. External Rotor Motor driven Axial fans are speed controlled by either frequency or voltage 2. Impellers are directly mounted on the motor for higher efficiency 3. Slim compact Design Quiet Operation, Low Weight. These external rotor motor fans use minimal space and are hence used in conditions with space restrictions4. Offered with optional accessories like flat guard, square or circular wall plate 5. Insulation class F . IP44 as standard, rated to operate from -400C to 650C 6. Application include, Building ventilation, Smoke Extraction, General ventilation, Hot air and fume removal, to aid forced ventilation or inlet of fresh-air and ensuring enough air changes to ensure healthy work space for your work force. 7. All These fans are available with Circular Casing with single side or Double side flange for Mounting assistance onto equipment/ducts etc. Please inform us during the time of order8. These fans can be also offered with Square type casing to suit equipment mounting as in above case, please inform us during the time of ordering9. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.10. A series of axial extraction turrets with horizontal air flow, particularly suitable to extract stale air from sheds, warehouses, large civil or industrial buildings and any place where large air flows at relatively low pressures are needed. The wide range available, with a capacity up to 34,000 m3/h, offers the possibility to choose the most appropriate model according to the problem. It is available in both single phase and three-phase versions. It can work in continuous service, and transfer fluids having a temperature up to 40°C.11. Upon request it can be supplied with an EEXD motor (explosion proof) provided with necessary certification.12. It must be remembered that with the installation of a gravity shutter, the capacity is reduced by approximately 10% .

Additional Information:

  • Delivery Time: 2 Week
  • Packaging Details: Wooden Crate Freight Charges Extra

View Complete details

get quoterequest a call back
  • Roof Extractor Axial Low Profile 630 4E
  • Roof Extractor Axial Low Profile 630 4E
  • Roof Extractor Axial Low Profile 630 4E
  • Roof Extractor Axial Low Profile 630 4E
  • Roof Extractor Axial Low Profile 630 4E
  • Roof Extractor Axial Low Profile 630 4E
Roof Extractor Axial Low Profile 630 4E

Roof Extractor Axial Low Profile 630 4E

Price on Request

Product Brochure

Place Of OriginPan India
Driven TypeElectric
Power850 W
Mounting TypeRoof Extractor Suitable for Slant and Flat roofs
BrandZyphyr
Size630 mm
CertificationISO 9008-2015
Voltage230 V AC
Roof Extractor Axial Flow Fans with External Rotor Motor
1. External Rotor Motor driven Axial fans are speed controlled by either frequency or voltage 2. Impellers are directly mounted on the motor for higher efficiency 3. Slim compact Design Quiet Operation, Low Weight. These external rotor motor fans use minimal space and are hence used in conditions with space restrictions4. Offered with optional accessories like flat guard, square or circular wall plate 5. Insulation class F . IP44 as standard, rated to operate from -400C to 650C 6. Application include, Building ventilation, Smoke Extraction, General ventilation, Hot air and fume removal, to aid forced ventilation or inlet of fresh-air and ensuring enough air changes to ensure healthy work space for your work force. 7. All These fans are available with Circular Casing with single side or Double side flange for Mounting assistance onto equipment/ducts etc. Please inform us during the time of order8. These fans can be also offered with Square type casing to suit equipment mounting as in above case, please inform us during the time of ordering9. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.10. A series of axial extraction turrets with horizontal air flow, particularly suitable to extract stale air from sheds, warehouses, large civil or industrial buildings and any place where large air flows at relatively low pressures are needed. The wide range available, with a capacity up to 34,000 m3/h, offers the possibility to choose the most appropriate model according to the problem. It is available in both single phase and three-phase versions. It can work in continuous service, and transfer fluids having a temperature up to 40°C.11. Upon request it can be supplied with an EEXD motor (explosion proof) provided with necessary certification.12. It must be remembered that with the installation of a gravity shutter, the capacity is reduced by approximately 10% .

Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges Extra

View Complete details

get quoterequest a call back
  • Roof Extractor Axial Low Profile 800-6D
  • Roof Extractor Axial Low Profile 800-6D
  • Roof Extractor Axial Low Profile 800-6D
  • Roof Extractor Axial Low Profile 800-6D
  • Roof Extractor Axial Low Profile 800-6D
  • Roof Extractor Axial Low Profile 800-6D
  • Roof Extractor Axial Low Profile 800-6D
  • Roof Extractor Axial Low Profile 800-6D
Roof Extractor Axial Low Profile 800-6D

Roof Extractor Axial Low Profile 800-6D

Price on Request

Product Brochure

Place Of OriginPan India
Driven TypeElectric
Power1650 W
Mounting TypeRoof Mount Suitable for both Flat and Slant Rood
BrandZyphyr
CertificationISO 9008-2015
Voltage415 V
Electric Current TypeAC
Roof Extractor Axial Flow Fans with External Rotor Motor
1. External Rotor Motor driven Axial fans are speed controlled by either frequency or voltage 2. Impellers are directly mounted on the motor for higher efficiency 3. Slim compact Design Quiet Operation, Low Weight. These external rotor motor fans use minimal space and are hence used in conditions with space restrictions4. Offered with optional accessories like flat guard, square or circular wall plate 5. Insulation class F . IP44 as standard, rated to operate from -400C to 650C 6. Application include, Building ventilation, Smoke Extraction, General ventilation, Hot air and fume removal, to aid forced ventilation or inlet of fresh-air and ensuring enough air changes to ensure healthy work space for your work force. 7. All These fans are available with Circular Casing with single side or Double side flange for Mounting assistance onto equipment/ducts etc. Please inform us during the time of order8. These fans can be also offered with Square type casing to suit equipment mounting as in above case, please inform us during the time of ordering9. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.10. A series of axial extraction turrets with horizontal air flow, particularly suitable to extract stale air from sheds, warehouses, large civil or industrial buildings and any place where large air flows at relatively low pressures are needed. The wide range available, with a capacity up to 34,000 m3/h, offers the possibility to choose the most appropriate model according to the problem. It is available in both single phase and three-phase versions. It can work in continuous service, and transfer fluids having a temperature up to 40°C.11. Upon request it can be supplied with an EEXD motor (explosion proof) provided with necessary certification.12. It must be remembered that with the installation of a gravity shutter, the capacity is reduced by approximately 10% .

Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight rate Extra

View Complete details

get quoterequest a call back
  • Roof Extractor Axial Slim Profile 900
  • Roof Extractor Axial Slim Profile 900
  • Roof Extractor Axial Slim Profile 900
  • Roof Extractor Axial Slim Profile 900
  • Roof Extractor Axial Slim Profile 900
  • Roof Extractor Axial Slim Profile 900
  • Roof Extractor Axial Slim Profile 900
Roof Extractor Axial Slim Profile 900

Roof Extractor Axial Slim Profile 900

Price on Request

Product Brochure

Product TypePowered Roof Extractor
Place Of OriginPan India
Driven TypeElectric
Power3100 W
Mounting TypeRoof Mount suitable for Flat and Slope roof
BrandZyphyr
CertificationISO 9008-2015
Voltage415 V AC

Roof Extractor Axial Flow Fans with External Rotor Motor


1. External Rotor Motor driven Axial fans are speed controlled by either frequency or voltage 

2. Impellers are directly mounted on the motor for higher efficiency 

3. Slim compact Design Quiet Operation, Low Weight. These external rotor motor fans use minimal space and are hence used in conditions with space restrictions

4. Offered with optional accessories like flat guard, square or circular wall plate 

5. Insulation class F . IP44 as standard, rated to operate from -400C to 650C 

6. Application include, Building ventilation, Smoke Extraction, General ventilation, Hot air and fume removal, to aid forced ventilation or inlet of fresh-air and ensuring enough air changes to ensure healthy work space for your work force. 

7. All These fans are available with Circular Casing with single side or Double side flange for Mounting assistance onto equipment/ducts etc. Please inform us during the time of order

8. These fans can be also offered with Square type casing to suit equipment mounting as in above case, please inform us during the time of ordering

9. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.

10. A series of axial extraction turrets with horizontal air flow, particularly suitable to extract stale air from sheds, warehouses, large civil or industrial buildings and any place where large air flows at relatively low pressures are needed. The wide range available, with a capacity up to 34,000 m3/h, offers the possibility to choose the most appropriate model according to the problem. It is available in both single phase and three-phase versions. It can work in continuous service, and transfer fluids having a temperature up to 40°C.

11. Upon request it can be supplied with an EEXD motor (explosion proof) provided with necessary certification.

12. It must be remembered that with the installation of a gravity shutter, the capacity is reduced by approximately 10% .



Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Rate Extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 610-2-7.5
  • Roof Extractor Tubular Axial 610-2-7.5
  • Roof Extractor Tubular Axial 610-2-7.5
  • Roof Extractor Tubular Axial 610-2-7.5
  • Roof Extractor Tubular Axial 610-2-7.5
  • Roof Extractor Tubular Axial 610-2-7.5
Roof Extractor Tubular Axial 610-2-7.5

Roof Extractor Tubular Axial 610-2-7.5

Price on Request

Product Brochure

Model Name/NumberSM-RE-2DBFC-610-CM-7.5
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialPlastic, Aluminium
MountingCeiling Fan, Roof Fan
Voltage415 V
Product TypeWall Mounted Fan, V-Belt Driven Unit, Duct Mounted Fan
Air Volume22500 CMH
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.

Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
Roof Exhaust Fan

Roof Exhaust Fan

Rs 25,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

MaterialStainless Steel
UsageIndustrial
Electric Current TypeAC
ConditionNew

We specialize in manufacturing an extensive range of Roof Exhaust Fan which are widely demanded in large number of industries owing to their extra ordinary features. This machine is resistant to wear and tear and requires no lubrication as the impellers fitted rotates with no contact between itself and the casing.

 

Application:

 

  • Manufacturing of textiles
  • Medical and laboratory equipment
  • Printing and paper handling
  • Vacuum packaging
  • • waste water treatment
  • Reprographics industry
  • Aeration of fluids
  • Pneumatic conveying
  • Plastic industry.


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Chennai
  • Production Capacity: 15000
  • Delivery Time: 14 days or less
  • Packaging Details: Standard wooden Case for surface For sea shipments light weight strudy caron/wooden combo pack will be used

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 610-6-0.37
  • Roof Extractor Tubular Axial 610-6-0.37
  • Roof Extractor Tubular Axial 610-6-0.37
  • Roof Extractor Tubular Axial 610-6-0.37
  • Roof Extractor Tubular Axial 610-6-0.37
Roof Extractor Tubular Axial 610-6-0.37

Roof Extractor Tubular Axial 610-6-0.37

Price on Request

Product Brochure

Minimum Order Quantity1 Number
Mounting TypeRoof Mount
Model Name/NumberSM-RE-6DBFC-610-CM-0.37
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialPlastic, Aluminium
MountingRoof Fan, Ceiling Fan
Voltage415 V
Product TypeDuct Mounted Fan, V-Belt Driven Unit, Roof Mount

Roof Extractor Fans

1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.

2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.

3. Our fans are driven by conventional AC motors  of reputed brands.

4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )

5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)

6. Static pressure offered by these fans max upto 50mm

7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building

8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.




Additional Information:

  • Delivery Time: 2 Week
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Axial  Low Profile 500-4E
  • Roof Extractor Axial  Low Profile 500-4E
  • Roof Extractor Axial  Low Profile 500-4E
  • Roof Extractor Axial  Low Profile 500-4E
  • Roof Extractor Axial  Low Profile 500-4E
  • Roof Extractor Axial  Low Profile 500-4E
  • Roof Extractor Axial  Low Profile 500-4E
  • Roof Extractor Axial  Low Profile 500-4E
Roof Extractor Axial  Low Profile 500-4E

Roof Extractor Axial Low Profile 500-4E

Price on Request

Product Brochure

Minimum Order Quantity1 Number
Mounting TypeRoof Mount Suitable for Slant and Flat roof
Model Name/NumberSM-RE-ER-4EBB-500 S/F
Blower TypeAxial
Usage/ApplicationIndustrial
Electric Current TypeAC
Blade MaterialMild steel
MountingCeiling Fan, Roof Fan
Voltage230 V AC
Roof Extractor Axial Flow Fans with External Rotor Motor
1. External Rotor Motor driven Axial fans are speed controlled by either frequency or voltage 2. Impellers are directly mounted on the motor for higher efficiency 3. Slim compact Design Quiet Operation, Low Weight. These external rotor motor fans use minimal space and are hence used in conditions with space restrictions4. Offered with optional accessories like flat guard, square or circular wall plate 5. Insulation class F . IP44 as standard, rated to operate from -400C to 650C 6. Application include, Building ventilation, Smoke Extraction, General ventilation, Hot air and fume removal, to aid forced ventilation or inlet of fresh-air and ensuring enough air changes to ensure healthy work space for your work force. 7. All These fans are available with Circular Casing with single side or Double side flange for Mounting assistance onto equipment/ducts etc. Please inform us during the time of order8. These fans can be also offered with Square type casing to suit equipment mounting as in above case, please inform us during the time of ordering9. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.10. A series of axial extraction turrets with horizontal air flow, particularly suitable to extract stale air from sheds, warehouses, large civil or industrial buildings and any place where large air flows at relatively low pressures are needed. The wide range available, with a capacity up to 34,000 m3/h, offers the possibility to choose the most appropriate model according to the problem. It is available in both single phase and three-phase versions. It can work in continuous service, and transfer fluids having a temperature up to 40°C.11. Upon request it can be supplied with an EEXD motor (explosion proof) provided with necessary certification.12. It must be remembered that with the installation of a gravity shutter, the capacity is reduced by approximately 10% .


Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Packing Freight Charges Will be extra

View Complete details

get quoterequest a call back
  • Roof Extractor Axial Low Profile 500 4D
  • Roof Extractor Axial Low Profile 500 4D
  • Roof Extractor Axial Low Profile 500 4D
  • Roof Extractor Axial Low Profile 500 4D
  • Roof Extractor Axial Low Profile 500 4D
  • Roof Extractor Axial Low Profile 500 4D
  • Roof Extractor Axial Low Profile 500 4D
Roof Extractor Axial Low Profile 500 4D

Roof Extractor Axial Low Profile 500 4D

Price on Request

Product Brochure

Minimum Order Quantity1 Number
Mounting TypeRoof Extractor Fan suitable for Flat and Slant Roof
Model Name/NumberSM-RE-ER-4DBB-500
Blower TypeAxial
Size500 mm
Usage/ApplicationIndustrial
Electric Current TypeAC
MaterialMild Steel
Blade MaterialMild Steel
Roof Extractor Axial Flow Fans with External Rotor Motor
1. External Rotor Motor driven Axial fans are speed controlled by either frequency or voltage 2. Impellers are directly mounted on the motor for higher efficiency 3. Slim compact Design Quiet Operation, Low Weight. These external rotor motor fans use minimal space and are hence used in conditions with space restrictions4. Offered with optional accessories like flat guard, square or circular wall plate 5. Insulation class F . IP44 as standard, rated to operate from -400C to 650C 6. Application include, Building ventilation, Smoke Extraction, General ventilation, Hot air and fume removal, to aid forced ventilation or inlet of fresh-air and ensuring enough air changes to ensure healthy work space for your work force. 7. All These fans are available with Circular Casing with single side or Double side flange for Mounting assistance onto equipment/ducts etc. Please inform us during the time of order8. These fans can be also offered with Square type casing to suit equipment mounting as in above case, please inform us during the time of ordering9. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.10. A series of axial extraction turrets with horizontal air flow, particularly suitable to extract stale air from sheds, warehouses, large civil or industrial buildings and any place where large air flows at relatively low pressures are needed. The wide range available, with a capacity up to 34,000 m3/h, offers the possibility to choose the most appropriate model according to the problem. It is available in both single phase and three-phase versions. It can work in continuous service, and transfer fluids having a temperature up to 40°C.11. Upon request it can be supplied with an EEXD motor (explosion proof) provided with necessary certification.12. It must be remembered that with the installation of a gravity shutter, the capacity is reduced by approximately 10% .

Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate packing Freight Charges extra

View Complete details

get quoterequest a call back
  • Roof Extractor Axial Low Profile 550 4E
  • Roof Extractor Axial Low Profile 550 4E
  • Roof Extractor Axial Low Profile 550 4E
  • Roof Extractor Axial Low Profile 550 4E
  • Roof Extractor Axial Low Profile 550 4E
  • Roof Extractor Axial Low Profile 550 4E
  • Roof Extractor Axial Low Profile 550 4E
Roof Extractor Axial Low Profile 550 4E

Roof Extractor Axial Low Profile 550 4E

Price on Request

Product Brochure

Minimum Order Quantity1 Number
PowerAC
Mounting TypeRoof Extractor Suitable for Flat and Slant Roof
Model Name/NumberSM-RE-4EBB-550
Blower TypeAxial
Blade MaterialMild Steel
BrandZyphyr
MountingRoof Fan
Size550 mm
Roof Extractor Axial Flow Fans with External Rotor Motor
1. External Rotor Motor driven Axial fans are speed controlled by either frequency or voltage 2. Impellers are directly mounted on the motor for higher efficiency 3. Slim compact Design Quiet Operation, Low Weight. These external rotor motor fans use minimal space and are hence used in conditions with space restrictions4. Offered with optional accessories like flat guard, square or circular wall plate 5. Insulation class F . IP44 as standard, rated to operate from -400C to 650C 6. Application include, Building ventilation, Smoke Extraction, General ventilation, Hot air and fume removal, to aid forced ventilation or inlet of fresh-air and ensuring enough air changes to ensure healthy work space for your work force. 7. All These fans are available with Circular Casing with single side or Double side flange for Mounting assistance onto equipment/ducts etc. Please inform us during the time of order8. These fans can be also offered with Square type casing to suit equipment mounting as in above case, please inform us during the time of ordering9. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.10. A series of axial extraction turrets with horizontal air flow, particularly suitable to extract stale air from sheds, warehouses, large civil or industrial buildings and any place where large air flows at relatively low pressures are needed. The wide range available, with a capacity up to 34,000 m3/h, offers the possibility to choose the most appropriate model according to the problem. It is available in both single phase and three-phase versions. It can work in continuous service, and transfer fluids having a temperature up to 40°C.11. Upon request it can be supplied with an EEXD motor (explosion proof) provided with necessary certification.12. It must be remembered that with the installation of a gravity shutter, the capacity is reduced by approximately 10% .

Additional Information:

  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Crate Freight Charges will be Extra

View Complete details

get quoterequest a call back
  • Roof Extractor Axial Low Profile 710-6D
  • Roof Extractor Axial Low Profile 710-6D
  • Roof Extractor Axial Low Profile 710-6D
  • Roof Extractor Axial Low Profile 710-6D
  • Roof Extractor Axial Low Profile 710-6D
  • Roof Extractor Axial Low Profile 710-6D
  • Roof Extractor Axial Low Profile 710-6D
  • Roof Extractor Axial Low Profile 710-6D
Roof Extractor Axial Low Profile 710-6D

Roof Extractor Axial Low Profile 710-6D

Price on Request

Product Brochure

Minimum Order Quantity1 Number
Place Of OriginPan India
Driven TypeElectric
Power1100 W
Mounting TypeRoof Mount Suitable for Flat and Slant roof
BrandZyphyr
CertificationISO 9008-2015
Voltage415 V AC
MountingRoof Mount
Roof Extractor Axial Flow Fans with External Rotor Motor
1. External Rotor Motor driven Axial fans are speed controlled by either frequency or voltage 2. Impellers are directly mounted on the motor for higher efficiency 3. Slim compact Design Quiet Operation, Low Weight. These external rotor motor fans use minimal space and are hence used in conditions with space restrictions4. Offered with optional accessories like flat guard, square or circular wall plate 5. Insulation class F . IP44 as standard, rated to operate from -400C to 650C 6. Application include, Building ventilation, Smoke Extraction, General ventilation, Hot air and fume removal, to aid forced ventilation or inlet of fresh-air and ensuring enough air changes to ensure healthy work space for your work force. 7. All These fans are available with Circular Casing with single side or Double side flange for Mounting assistance onto equipment/ducts etc. Please inform us during the time of order8. These fans can be also offered with Square type casing to suit equipment mounting as in above case, please inform us during the time of ordering9. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.10. A series of axial extraction turrets with horizontal air flow, particularly suitable to extract stale air from sheds, warehouses, large civil or industrial buildings and any place where large air flows at relatively low pressures are needed. The wide range available, with a capacity up to 34,000 m3/h, offers the possibility to choose the most appropriate model according to the problem. It is available in both single phase and three-phase versions. It can work in continuous service, and transfer fluids having a temperature up to 40°C.11. Upon request it can be supplied with an EEXD motor (explosion proof) provided with necessary certification.12. It must be remembered that with the installation of a gravity shutter, the capacity is reduced by approximately 10% .

Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges Extra

View Complete details

get quoterequest a call back
Powered Roof Ventilators

Powered Roof Ventilators

Rs 35,000  / UnitGet Best Price
MaterialStainless Steel
Automatic GradeSemi-Automatic, Automatic
We are a trusted name in the industry for manufacturing and supplying Powered Roof Ventilators. The offered roof ventilators are ideal for providing ventilation in industries, power plants and restaurant kitchens. These ventilators are made in a sophisticated manufacturing unit and are in adherence to the latest market trends. We are well-equipped for handling bulk orders.

Features:

  • Provide ventilation
  • High tensile strength
  • Low operational noise

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 965-4-18.5
  • Roof Extractor Tubular Axial 965-4-18.5
  • Roof Extractor Tubular Axial 965-4-18.5
  • Roof Extractor Tubular Axial 965-4-18.5
  • Roof Extractor Tubular Axial 965-4-18.5
  • Roof Extractor Tubular Axial 965-4-18.5
Roof Extractor Tubular Axial 965-4-18.5

Roof Extractor Tubular Axial 965-4-18.5

Price on Request

Product Brochure

Model Name/NumberSM-RE-4DBFC-965-CM-18.5
Blade MaterialAluminium, Plastic
BrandZyphyr
MountingDuct Fan, Roof Fan, Ceiling Fan
Product TypeWall Mounted Fan, Duct Mounted Fan, V-Belt Driven Unit
Frequency50 Hz
Voltage415 V AC
Air Volume68000 CMH
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.

Additional Information:

  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 762-4-3.7
  • Roof Extractor Tubular Axial 762-4-3.7
  • Roof Extractor Tubular Axial 762-4-3.7
  • Roof Extractor Tubular Axial 762-4-3.7
  • Roof Extractor Tubular Axial 762-4-3.7
  • Roof Extractor Tubular Axial 762-4-3.7
Roof Extractor Tubular Axial 762-4-3.7

Roof Extractor Tubular Axial 762-4-3.7

Price on Request

Product Brochure

Minimum Order Quantity1 Number
Model Name/NumberSM-RE-4DBFC-762-CM-5.5
Blade MaterialSS, Plastic, Aluminium
BrandZyphyr
MountingDuct Fan, Roof Fan, Ceiling Fan
Size762 mm
Product TypeWall Mounted Fan, Roof, Duct Mounted Fan, V-Belt Driven Unit
Frequency50 Hz
Voltage415 V AC
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.

Additional Information:

  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
  • Roof Extractor Tubular Axial 965-4-7.5
  • Roof Extractor Tubular Axial 965-4-7.5
  • Roof Extractor Tubular Axial 965-4-7.5
  • Roof Extractor Tubular Axial 965-4-7.5
  • Roof Extractor Tubular Axial 965-4-7.5
  • Roof Extractor Tubular Axial 965-4-7.5
  • Roof Extractor Tubular Axial 965-4-7.5
Roof Extractor Tubular Axial 965-4-7.5

Roof Extractor Tubular Axial 965-4-7.5

Price on Request

Product Brochure

Minimum Order Quantity1 Number
Model Name/NumberSM-RE-4DBFC-965-CM-7.5
Blade MaterialAluminium, Plastic
BrandZyphyr
MountingRoof Fan, Duct Fan, Ceiling Fan
Size965 mm
Frequency50 Hz
Voltage415 V AC
Air Volume39000 CMH
Roof Extractor Fans
1. Tubular or Tube axial Roof Ventilators provide cost effective, general-purpose ventilation of commercial buildings.2. Belt and direct drive models are available with adjustable pitch, cast aluminium or Glass filled polyamide (PAG) to meet specific application requirements.3. Our fans are driven by conventional AC motors  of reputed brands.4. Direct drive sizes 483 mm to 965 mm(19"to 38") dia. With air volume ranges from 6800 CMH to 60000 CMH(4000 CFM to 40000 CFM )5. Belt drive sizes 483 mm to 1524 mm (19" to 60") dia with air volume ranges up to 105000 CMH (62000 CFM)6. Static pressure offered by these fans max upto 50mm7. All these up blast type roof extractors include a heavy-duty, galvanized steel stack cap with butterfly dampers to discharge air upward and prevent recirculation into the building8. Bird Screens, Rain Hoods, Roof Curbs in case of flat roofs or cut out sheets in case of slant roofs are provided with.

Additional Information:

  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Crate Freight Charges will be extra Installation Charges are extra

View Complete details

get quoterequest a call back
Roof Extractor Fan

Roof Extractor Fan

Rs 15,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

TypeRoof Mounted
MaterialSS
BrandSouthern Magentic
We are among the prominent manufacturers and exporters of Roof Extractor Fan. The offered fan has been made from superior grade materials and is unparalleled in terms of performance. It is used for providing ventilation in kitchens, factories and power plants. Being sturdy in terms of construction, it is ideal for heavy duty usage. Our fan is energy efficient as well.

Features:

  • Effective ventilation
  • Easy to install
  • Resistant to wear and tear


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Chennai
  • Production Capacity: 15000
  • Delivery Time: 21 days or less depending on quantity and size of fan some of the ranges are offered ex-stock
  • Packaging Details: Wooden case or crate is offered for the surface transport for shipment by sea, export transit worthy packing is offered they are light weight and rigid

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES