Southern Magnetics Pvt. Ltd.

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor 

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor 

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor 

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor 

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor 

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor NEMA frame Sizes 254-256 to 447-449

2.      FCUs are also made for all applicable frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)

Forced Cooling Units for motor

1.      FCUs for motor are available for all frame sizes of motor from IE frame Sizes 90 to 355

2.      FCUs are also made for NEMA frame Sizes and  for DC motors

3.      Generally, we can offer these FCUs for motors made by all manufacturers

4.      Please note that these are not OEM item, but it will suit your main motor and it will protect its windings from overheating, when you run it lower speeds or in intermittently

5.      For mounting the external fan, it is necessary to remove the fan cover and the fan blade If no extension can be used, is to cut the shaft. If ordered with motor, the external fan can also be delivered assembled. Please choose execution. We also give the cowl extended than the original so that you do not have to cut the non-drive end shaft and the originality of the motor is maintained

6.      Electric motors with forced ventilation units are used in all fields of the industry. From the food processing industry up to rolling mills and offshore applications – they all have different demands on the motors and forced ventilation units. Different forced ventilation units are available for any special field of application. We offer standardized forced ventilation units in IP44/IP55/IP 66 but also customized solutions. All forced ventilation units are specially manufactured according to customer´s demand to fit on each individual electric motor / gear. Thus, a simple mounting or change of the units is assured.

7.      The existing fan cowl of the electric motor will be exchanged against the complete forced ventilation unit, while the standard ventilation fan will be disassembled. Our units are equipped with a separate terminal box and are delivered primed. (also without terminal box available)